MC2 - P2 Mercury Coil Driver - Harness



Contains all ECU/TCU connections from the 4 Way Connector for most engine combinations.

Products that can use this harness

  • Mercury Coil Drivers

Download PDF version MC2 – P2 Harness Overview

Download PDF MC2 – P2 Output Harness Drawing


Products that can use this harness

  • Mercury Coil Drivers

•This Level 1 harness was made for the 2 Way Mercury Coil driver. It will connect 2 basic coils to the high voltage drivers.

Design Points to take Notice of.
•This harness has 2 High Voltage Negative drivers used for basic Coils without built in drivers.
•Output Wire Colours are the same as the Input wire colours from the MEX harness. This may be confusing to the standard Striped Black wires from other systems. But we tried to keep the input and output the same to minimise confusion.

Wire Names and connections on this harness:

2x Negative outputs (Striped Red)

See the design drawing for thickness and lengths or wires. See the connection drawings in the specific product manual on how to connect the harness to each item it was designed for.

NB! Wires that are not connected must be isolated to prevent shorts or interference.

People also bought: