Orion2 TCU (Hardware Class)
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Advance Features - Speedometer Calibration, 2nd Pull off, Drive-Overdrive select, 4x4 etc |
R3,398
|
||||
|
Basic Functions + Speedometer Calibration |
R2,710
|
||||
|
Basic Functions |
R2,230
|
USB Tuning Cable
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Required to connect with the Tuning Software |
R350
|
Recommended Harnesses (Engine connectors are not included)
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Contains only the wiring on the pins |
R132
|
||||
 |
Use with ECU Application. Contains all the sensor wiring |
R470
|
||||
|
Stand Alone Application. Contains all the sensor wiring |
R479
|
||||
 |
Contains all the wiring, Relay and Fuse |
R472
|
||||
 |
Contains the wiring for Remote Tiptronic Buttons and Comms Extension |
R136
|
||||
|
Contains the wiring for Remote Tiptronic Buttons and Comms Extension |
R116
|
Older Harnesses (Engine connectors are not included)
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
R63
|
|||||
 |
R94
|
Diode Boards
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Required for PWM Solenoids which is driven by a Positive Signal with Common Earth |
R38
|
||||
|
Required for PWM Solenoids which is driven by a Negative Signal with Common Positive |
R38
|
Shifter Converter A/D Board
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Required to convert Parallel Digital Switches from the Shifter Range switch to an Analogue signal |
R90
|
||||
|
Required to convert Serial Digital Switches from the Shifter Range switch to an Analogue signal |
R114
|
Electronic Relay 45Amp
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Optional Solid State Relay to replace Mechanical Relays |
R218
|
Firmware Programmer
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Optional for changing or updating Firmware |
R1,569
|
Simmulater3
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Optional for dealers to test Spitronics Devices |
R2,703
|
||||
 |
Required for each product that must be tested on the Simulator |
R328
|
Connectors and Pins
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Optional for dealers that wants to build their own harnesses |
R7
|
||||
|
Optional for dealers that wants to build their own harnesses |
R8
|
||||
|
Optional for dealers that wants to build their own harnesses |
R10
|
||||
|
Optional for dealers that wants to build their own harnesses |
R13
|
||||
|
Optional for dealers that wants to build their own harnesses |
R35
|