Mercury2 ECU (Hardware Class)
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Racing Features - Multi Coil |
R4,690
|
||||
|
Advance Features - Multi Coil |
R3,986
|
||||
|
Complex Trigger - Distributor |
R3,330
|
||||
|
Simple Trigger - Distributor |
R2,928
|
USB Tuning Cable
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Required to connect with the Tuning Software |
R350
|
Map Sensor
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Required to Measures Manifold Pressure up to 1.5 Bar Boost pressure Optional to Measure Altitude Pressure for Baro Compensation |
R863
|
||||
 |
Required to Measures Manifold Pressure up to 2 Bar Boost pressure |
R920
|
||||
|
Required to Measures Manifold Pressure up to 3 Bar Boost pressure |
R920
|
Altitude Sensor
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
|
Optional to Measure Altitude Pressure for Baro Compensation |
R863
|
Harnesses Export Complete
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Contains all the wiring relays and fuses. Engine connectors are not included. |
R2,123
|
Economy
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Contains wiring on P5 connector only. Power wires fuses and relays are not included. |
R91
|
||||
 |
Contains wiring on P1 connector only. Power wires fuses and relays are not included. |
R312
|
||||
|
Contains wiring on P1 connector only. Power wires fuses and relays are not included. |
R280
|
||||
|
Contains wiring on P4 connector only. Power wires fuses and relays are not included. |
R134
|
||||
|
Contains wiring on P3 connector only. Power wires fuses and relays are not included. |
R148
|
||||
|
Contains wiring on P2 connector only. Power wires fuses and relays are not included. |
R179
|
||||
|
Contains wiring on P1 connector only. Power wires fuses and relays are not included. |
R261
|
||||
 |
R94
|
|||||
 |
R63
|
Stepper Idle Control
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Required if the engine has a 4 Pole Common Stepper Idle Control |
R442
|
||||
 |
Required if the engine has a 4 Pole Bi-Polar Stepper Idle Control |
R541
|
||||
|
Contains the power wires as well as the inputs from the ECU |
R143
|
Coil Driver
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Contains the power wires as well as the inputs from ECU |
R45
|
||||
 |
Contains all ECU/TCU connections from the 4 Way Connector for most engine combinations |
R56
|
||||
|
Harness has 4 High Voltage Negative drivers used for basic Coils without built in drivers |
R90
|
||||
|
Harness has 6 High Voltage Negative drivers used for basic Coils without built in drivers |
R125
|
||||
 |
Required for 2 Basic Coils with no built in Igniters |
R750
|
||||
 |
Required for 4 Basic Coils with no built in Igniters |
R1,053
|
||||
 |
Required for 6 Basic Coils with no built in Igniters |
R1,280
|
Electronic Relay 45Amp
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Optional Solid State Relay to replace Mechanical Relays |
R218
|
Firmware Programmer
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Optional for changing or updating Firmware |
R1,569
|
Simmulater3
Filters
Sort results
Reset
Apply
Name Priority Description Quantity Price 
Optional for dealers to test Spitronics Devices
R2,703
Required for each product that must be tested on the Simulator
R486
Required for each product that must be tested on the Simulator
R486
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
|
Optional for dealers to test Spitronics Devices |
R2,703
|
||||
|
Required for each product that must be tested on the Simulator |
R486
|
||||
|
Required for each product that must be tested on the Simulator |
R486
|
Connectors and Pins
Filters
Sort results
Reset
Apply
Name | Priority | Description | Quantity | Price | ||
|---|---|---|---|---|---|---|
 |
Optional for dealers that wants to build their own harnesses |
R7
|
||||
|
Optional for dealers that wants to build their own harnesses |
R8
|
||||
|
Optional for dealers that wants to build their own harnesses |
R10
|
||||
|
Optional for dealers that wants to build their own harnesses |
R13
|
||||
|
Optional for dealers that wants to build their own harnesses |
R14
|